Downpipe fastening
Thermo Vario
Product information "Thermo Vario"
Properties
- Variable down pipe fixing for down pipe distance 30-60 mm
- Ideal for uneven façades
- For installation before and after plaster work
- Flexible cap protects from rain and splashing water
- Protection sleeve protects the thread from dirt during plaster work
- Specifically for fixing downpipes in ETICS systems
- Adjustable hanger bolt in order to level irregularities in the façade
- Also suitable for installing garden trellis panels, house signs, lighting, air conditioning, alarm systems, electrical installations, etc.
- Thermal separation thanks to Thermo Plus insulation wall plug
- Thanks to its extensive accessories, installation before and after plaster work on the façade is possible
- Pre-drill into thick and hard plaster layers (Ø 24 mm)
- Screw in thermal wall plug with included SW 12 bit
- Screw in hanger bolt up to insertion mark
- When installing before plaster work, slide the protection sleeve over the threaded rod (protection against dirt)
- Remove protection sleeve after plaster work
- Set the correct distance to the façade by screwing the threaded rod in or out
- Slide on the cap
- Install the fixture
| Area of application: | Indoors and outdoors |
|---|---|
| Eigenschaft: | Fallrohrbefestigung |
| Insulation thickness: | 100 |
| Plug length: | 85 |
| Screw type: | Hanger bolt |
Safety instructions
- Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads)
Product information "Thermo Vario"
Properties
- Variable down pipe fixing for down pipe distance 30-60 mm
- Ideal for uneven façades
- For installation before and after plaster work
- Flexible cap protects from rain and splashing water
- Protection sleeve protects the thread from dirt during plaster work
- Specifically for fixing downpipes in ETICS systems
- Adjustable hanger bolt in order to level irregularities in the façade
- Also suitable for installing garden trellis panels, house signs, lighting, air conditioning, alarm systems, electrical installations, etc.
- Thermal separation thanks to Thermo Plus insulation wall plug
- Thanks to its extensive accessories, installation before and after plaster work on the façade is possible
- Pre-drill into thick and hard plaster layers (Ø 24 mm)
- Screw in thermal wall plug with included SW 12 bit
- Screw in hanger bolt up to insertion mark
- When installing before plaster work, slide the protection sleeve over the threaded rod (protection against dirt)
- Remove protection sleeve after plaster work
- Set the correct distance to the façade by screwing the threaded rod in or out
- Slide on the cap
- Install the fixture
| Area of application: | Indoors and outdoors |
|---|---|
| Eigenschaft: | Fallrohrbefestigung |
| Insulation thickness: | 100 |
| Plug length: | 85 |
| Screw type: | Hanger bolt |
Safety instructions
- Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads)
