Insulation wall plug
Thermo Plus
Properties
-TOX patent: Processing without pre-drilling or special tools possible
-Effectively prevents thermal bridges
-No pressure load on the facade
-Quick processing and immediately loadable
-Suitable for M8 and M10 hanger bolts
-SW 12 internal drive with enclosed bit for high force transmission
Description & Application
-Insulation anchor with coarse, conical thread and flat head
-With hexagon socket drive (SW 12) with receptacle for wood screw Ø 8.0 - 10.0 mm resp. Hanger bolt M8 - M10
-Matching bit SW 12 is included in each package
Processing & Installation
On non-plastered insulation materials without pre-drilling with a cordless screwdriver or screwdriver to screw in the anchor
On plastered insulation materials, the plaster is with a drill-Ø 24 - 25 mm
In wood fiber boards, pre-drill with Ø 12 mm
To prevent water ingress after installation, seal the annular gap between the edge of the plug and the plaster with sealing adhesive or paintable acrylic. seal the annular gap between the edge of the plug and the plaster with sealing adhesive or paintable acrylic
.
| Area of application: | Indoors and outdoors |
|---|---|
| Diameter: | 24 |
| Eigenschaft: | Dämmstoffdübel |
| Plug length: | 85 |
| Suitable screw diameter: | 8,0-10,0 |
Safety instructions
- Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads)
Properties
-TOX patent: Processing without pre-drilling or special tools possible
-Effectively prevents thermal bridges
-No pressure load on the facade
-Quick processing and immediately loadable
-Suitable for M8 and M10 hanger bolts
-SW 12 internal drive with enclosed bit for high force transmission
Description & Application
-Insulation anchor with coarse, conical thread and flat head
-With hexagon socket drive (SW 12) with receptacle for wood screw Ø 8.0 - 10.0 mm resp. Hanger bolt M8 - M10
-Matching bit SW 12 is included in each package
Processing & Installation
On non-plastered insulation materials without pre-drilling with a cordless screwdriver or screwdriver to screw in the anchor
On plastered insulation materials, the plaster is with a drill-Ø 24 - 25 mm
In wood fiber boards, pre-drill with Ø 12 mm
To prevent water ingress after installation, seal the annular gap between the edge of the plug and the plaster with sealing adhesive or paintable acrylic. seal the annular gap between the edge of the plug and the plaster with sealing adhesive or paintable acrylic
.
| Area of application: | Indoors and outdoors |
|---|---|
| Diameter: | 24 |
| Eigenschaft: | Dämmstoffdübel |
| Plug length: | 85 |
| Suitable screw diameter: | 8,0-10,0 |
Safety instructions
- Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads)
