All-purpose wall plug
Tetrafix XL
Product information "Tetrafix XL"
Properties
- Extended shaft for special frame wall plug applications
- Deep anchoring in porous concrete
- Holds secure in almost all building materials
- Automatic knotting or expansion depending on the building material
- Wide range of applications thanks to different shaft lengths
- Removable wall plug cap prevents slippage into the drill hole
- Spiral shape allows high load-bearing values
- All-purpose wall plug for virtually all building materials
- Spiral shaped expansion element
- Extra long shaft lengths for bridging thick, non-load bearing layers
- Removable wall plug capAnti-rotation locks on the fixing neck prevent rotation in the building material
- Make a drill hole the size of the wall plug diameter
- Drill into perforated brick and gypsum plasterboard in a rotary motion without impact to prevent the drill hole from becoming too large or webs in the perforated brick from breaking away
- The drill hole in gypsum plasterboard must be made with a wood or metal drill
- Drill into concrete and solid brick with impact
- Minimum screw length = wall plug length + fixture thickness + 5 mm
- Pre-positioned and through installation possible
Area of application: | Indoors and outdoors |
---|---|
Diameter: | 6 |
Plug length: | 65 |
Suitable screw diameter: | 4,0-5,0 |
TOXBeschreibung2: | Allzweckdübel |
Safety instructions
- The specified holding values refer to screws with the largest screw diameter
- The anchoring depth of the wall plug must be observed
- Drilling method and drill hole cleaning must be adapted to the building material
- The recommended loads only apply to installation in the building material, not for installation in joints
- Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads)
Product information "Tetrafix XL"
Properties
- Extended shaft for special frame wall plug applications
- Deep anchoring in porous concrete
- Holds secure in almost all building materials
- Automatic knotting or expansion depending on the building material
- Wide range of applications thanks to different shaft lengths
- Removable wall plug cap prevents slippage into the drill hole
- Spiral shape allows high load-bearing values
- All-purpose wall plug for virtually all building materials
- Spiral shaped expansion element
- Extra long shaft lengths for bridging thick, non-load bearing layers
- Removable wall plug capAnti-rotation locks on the fixing neck prevent rotation in the building material
- Make a drill hole the size of the wall plug diameter
- Drill into perforated brick and gypsum plasterboard in a rotary motion without impact to prevent the drill hole from becoming too large or webs in the perforated brick from breaking away
- The drill hole in gypsum plasterboard must be made with a wood or metal drill
- Drill into concrete and solid brick with impact
- Minimum screw length = wall plug length + fixture thickness + 5 mm
- Pre-positioned and through installation possible
Area of application: | Indoors and outdoors |
---|---|
Diameter: | 6 |
Plug length: | 65 |
Suitable screw diameter: | 4,0-5,0 |
TOXBeschreibung2: | Allzweckdübel |
Safety instructions
- The specified holding values refer to screws with the largest screw diameter
- The anchoring depth of the wall plug must be observed
- Drilling method and drill hole cleaning must be adapted to the building material
- The recommended loads only apply to installation in the building material, not for installation in joints
- Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads)